Moisture Remediation Systems
Our Moisture Remediation Systems eliminate the 28-day cure period and have low odor, while being solvent-free.
CMR-1000
CMR-1000 is a 2-part, 100% epoxy primer suitable for green/new concrete or moisture remediation on older/existing slabs. CMR-1000 is formulated to reduce moisture vapor emission rate of 24 pounds to approximately 3 pounds as per the Calcium Chloride Test. CMR-1000 can be applied any time after 72 hours of the concrete being poured.
BENEFITS
- Eliminates 28 Day Cure Period
- Excellent Adhesion to Clean, Sound Damp
- Concrete
- Reduces Alkalinity from a pH up to 14 down to a pH of 7 (ASTM D – 1308)
- Can be Applied at 100% RH
- U.S.D.A. Compliant
- V.O.C. Compliant
- Low Odor/Solvent Free
- D.O.T. Non Corrosive
MoisturEnd - New Generation Moisture Remediation System
MoisturEnd is a new generation solvent – free epoxy system that offers superior vapor transmission control. An independent 3 rd party testing lab found MoisturEnd to have a perm rating of < 0.1. This perm rating means that MoisturEnd may be suitable for a variety of floor toppings such as vinyl tile, and sheeting, rubber backed carpet, hardwood and solvent free epoxy topcoats .
BENEFITS
- Eliminates 28 Day Cure Period
- Zero VOC’s
- Low Odor/Solvent Free
- Low Mix Viscosity of 700 cps at 25°C
-
Adequate Pot Life with Fast Re-Coat Times
- <.01 yield Rating (.10 perms)
-
Can Be Applied to Slabs with 100% RH
Grout and Bedding Systems
Expand each section to download a Technical or Safety Data Sheet.
CXE-204
CXE-204 Grout is a three component, 100% solids, epoxy grout for bedding or grouting suitable for bricklayer and tile setter methods.
BENEFITS
- Solvent Free, Low Odor, VOC Compliant
- U.S.D.A. Compliant
- Very Good Chemical Resistance
- Excellent Impact and Abrasion Resistance
- Resin-Rich
- Excellent Adhesion to Brick and Tile
- Color Stable
Safety Data Sheet – Standard Cure – Part A
Safety Data Sheet – Standard Cure – Part B
Safety Data Sheet – Fast Cure – Part A
Safety Data Sheet – Fast Cure – Part B
CXE-404 Grout
CXE-404 is a three component, high solids, grout for bedding or grouting for areas where high chemical resistance is needed.
BENEFITS
- Solvent Free, Low Odor, VOC Compliant
- U.S.D.A. Compliant
- Excellent Chemical Resistance even to 98% Sulfuric Acid
- Excellent Impact and Abrasion Resistance
- Resin-Rich
- Excellent Adhesion to Brick and Tile
- Color Stable
Safety Data Sheet – Standard Cure – Part A
Safety Data Sheet – Standard Cure – Part B
Safety Data Sheet – Fast Cure – Part A
Safety Data Sheet – Fast Cure – Part B
Wall Systems
Expand each section to download a Technical or Safety Data Sheet.
CXE-207 High-Build Coating
CXE-207 High-Build Coating is a two component, 100% solids, epoxy high-build coating system for walls.
BENEFITS
- Solvent Free, Low Odor, VOC Compliant
- U.S.D.A. Compliant
- Can be Applied up to 125 Mils in One Coat
- Resin Rich
- Easy to Clean Surface
- Can be Reinforced with Fiberglass
Safety Data Sheet – Standard Cure – Part A
Safety Data Sheet – Standard Cure – Part B
Safety Data Sheet – Fast Cure – Part A
Safety Data Sheet – Fast Cure – Part B
CXE-407 Novolac
CXE-407 is a two component, 100% solids epoxy hi-build coating system for walls where high chemical resistance is needed.
BENEFITS
- Solvent Free, Low Odor, VOC Compliant
- U.S.D.A. Compliant
- Can be Applied up to 125 Mils in One Coat
- Resin Rich
- Easy to Clean Surface
- Can be Reinforced with Fiberglass
Safety Data Sheet – Standard Cure – Part A
Safety Data Sheet – Standard Cure – Part B
Safety Data Sheet – Fast Cure – Part A
Safety Data Sheet – Fast Cure – Part B
CXE-206 Liner
CXE-206 Liner is a three component, 100% solids, trowelable epoxy liner system.
BENEFITS
- Solvent Free, Low Odor, VOC Compliant
- U.S.D.A. Compliant
- Good Chemical Resistance
- Can Be Applied up to 1/8” Thick in One Pass
- Can Be Reinforced with Fiberglass
- Excellent Impact and Abrasion Resistance
- Resin-Rich
- Easy to Clean Hygienic Surface
Safety Data Sheet – Standard Cure – Part A
Safety Data Sheet – Standard Cure – Part B
Safety Data Sheet – Fast Cure – Part A
Safety Data Sheet – Fast Cure – Part B
CXE-406 Liner
CXE-406 is a three component, 100% solids, trowelable epoxy liner system for walls and trenches where high chemical resistance is needed.
BENEFITS
- Solvent Free, Low Odor, VOC Compliant
- U.S.D.A. Compliant
- Excellent Chemical Resistance
- Can Be Applied up to 1/8” Thick in One Pass
- Can Be Reinforced with Fiberglass
- Excellent Impact and Abrasion Resistance
- Resin-Rich
- Easy to Clean Hygienic Surface
Safety Data Sheet – Standard Cure – Part A
Safety Data Sheet – Standard Cure – Part B
Safety Data Sheet – Fast Cure – Part A
Safety Data Sheet – Fast Cure – Part B
Miscellaneous
Expand each section to download a Technical or Safety Data Sheet.
CXE-708 Flexible Joint Filler
CXE-708 is a flexible joint filler for areas where movement can be expected.
BENEFITS
- 100% Elongation
- Will stay Flexible to 40℉
- Resistant to Hot Water and Steam Cleaning
-
Can be Used Indoors or Outdoors, but Will Discolor (amber) in sunlight.
- Water Wipeable
- Good Chemical Resistance
- Buena Resistencia Química
Safety Data Sheet – Standard Cure – Part A
Safety Data Sheet – Standard Cure – Part B
UX-803 Lilly White
UX-834 Light Gray or Cadet Gray
UX-835 Canada Gray Liquid Pigment
UX-851-CM Medium Gray
UX-838 Dark Gray
UX-531 Regal Blue Liquid Pigment
UX-318 Safety Red Liquid Pigment
UX-104 Safety Yellow Liquid Pigment
White Aluminum Oxide
Still Have Questions? Get In Touch With Us